setting load balancing

Setelah Mikrotik diinstall, pastikan dulu bahwa interface pada mikrotik ada 4biji, interface 1 menuju ke klient, interface 2 menuju ke Speedy 1, interface 3 menuju ke speedy 2 dan interface 4 menuju ke squid web proxy.

untuk setting squid bisa dilihat disini, dan baiklah kita mulai copy paste setting dibawah ini pada terminal Mikrotik :

/in eth
set ether1 name="intranet"  disabled=no
set ether2 name="speedy-1"  disabled=no
set ether3 name="speedy-2"  disabled=no
set ether4 name="proxy"  disabled=no

/ip add
add address=192.168.1.2/24 interface=speedy-1 comment="ke speedy-1"
add address=192.168.2.2/24 interface=speedy-2 comment="ke speedy-2"
add address=192.168.11.1/27 interface=intranet comment="ke Hub"
add address=192.168.10.2/30 interface=proxy comment="ke-proxy"

/ ip dns
set primary-dns=202.134.1.10 secondary-dns=202.134.0.155 

allow-remote-requests=yes cache-size=4048KiB cache-max-ttl=1w

/ ip firewall mangle
add chain=prerouting in-interface=intranet 

connection-state=new nth=1,2,0 action=mark-

connection new-connection-mark=satu passthrough=yes comment=""
add chain=prerouting in-interface=intranet 

connection-mark=satu action=mark-routing new-routing-mark=satu

passthrough=no comment=""
add chain=prerouting in-interface=intranet 

connection-state=new nth=1,2,1 action=mark-

connection new-connection-mark=dua passthrough=yes comment=""
add chain=prerouting in-interface=intranet 

connection-mark=dua action=mark-routing 

new-routing-mark=dua passthrough=no comment="" disabled=no
add chain=prerouting in-interface=proxy 

connection-state=new nth=1,2,0 action=mark-connection 

new-connection-mark=tiga passthrough=yes comment=""
add chain=prerouting in-interface=proxy 

connection-mark=tiga action=mark-routing new-routing-mark=tiga 

passthrough=no comment=""
add chain=prerouting in-interface=proxy 

connection-state=new nth=1,2,1 action=mark-connection 

new-connection-mark=empat passthrough=yes comment=""
add chain=prerouting in-interface=proxy 

connection-mark=empat action=mark-routing new-routing-mark=empat

passthrough=no comment="" disabled=no

/ ip firewall nat
add chain=srcnat out-interface=speedy-1 

connection-mark=satu action=src-nat to-addresses=192.168.1.1 

to-ports=0-65535 comment="" disabled=no
add chain=srcnat out-interface=speedy-2 connection-mark=dua 

action=src-nat 

to-addresses=192.168.2.1 to-ports=0-65535 comment="" disabled=no
nat add chain=dstnat protocol=tcp dst-port=80 

action=redirect to-ports=3128
add chain=dstnat protocol=tcp dst-port=3128 

action=redirect to-ports=3128
add chain=dstnat protocol=tcp dst-port=8080 

action=redirect to-ports=3128

/ ip firewall connection tracking
set enabled=yes tcp-syn-sent-timeout=2s 

tcp-syn-received-timeout=2s tcp-established-timeout=1d 

tcp-fin-wait-timeout=5s tcp-close-wait-timeout=5s 

tcp-last-ack-timeout=5s tcp-time-wait-timeout=5s 

tcp-close-timeout=5s udp-timeout=5s 

udp-stream-timeout=1m icmp-timeout=5s generic-timeout=5m

tcp-syncookie=no

/ ip route
add dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=255 

target-scope=10

routing-mark=satu comment="" disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=255 

target-scope=10 

routing-mark=dua comment="" disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=255 

target-scope=10

/ ip proxy
set enabled=yes port=3128 parent-proxy=192.168.10.1:3128 

maximal-client

sumber:     http://jauhdimata.com/load-balancing-mikrotik-proxy#more-429